part number: LMR12D14V published date : mar 17, 2008 drawing no : sdsa4848 v3 checked : b .l.liu p.1/4 t-1 3/4 (5mm) solid state lamp www.sunled.com features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z 14v internal resistor. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. absolute maximum ratings (t a =25c ) mr (gaalas) unit reverse voltage v r 5 v forward voltage v f 16 v power dissipation p t 160 mw operating temperature t a -40 ~ +70 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds c lead solder temperature [5mm below package base 260c for 5 seconds operating characteristics (t a =25c ) mr (gaalas) unit forward current (typ.) (vf=14v) i f 10.5 ma forward current (max.) (vf=14v) i f 13.5 ma reverse current (max.) (v r =14v) i r 10 ua wavelength of peak emis- sion (typ.) (vf=14v) p 660 nm spectral line full w idth at half-maximum (typ.) (vf=14v) d 640 nm spectral line half-width (vf=14v) (typ.) ? 20 nm part number emitting color emitting material lens-color luminous intensity ( v =14v ) mcd wavelength nm p viewing angle 2 1/2 min. typ. LMR12D14V red gaalas red diffused 70 158 660 30
part number: LMR12D14V published date : mar 17, 2008 drawing no : sdsa4848 v3 checked : b .l.liu p.2/4 t-1 3/4 (5mm) solid state lamp www.sunled.com ? mr
part number: LMR12D14V published date : mar 17, 2008 drawing no : sdsa4848 v3 checked : b .l.liu p.3/4 t-1 3/4 (5mm) solid state lamp www.sunled.com remarks: if special sorting is required (e .g. binning based on luminous in tensity / luminous flux or wavelength), the typical accuracy o f the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% note: accuracy may depend on the sorting parameters.
part number: LMR12D14V published date : mar 17, 2008 drawing no : sdsa4848 v3 checked : b .l.liu p.4/4 t-1 3/4 (5mm) solid state lamp www.sunled.com packing & label specifications LMR12D14V
|